China Far-210 5 Axis Indexing Rotary Table Worm and Worm Gear Taiwan Made spurs gear

Item Description

Product/Product Device Much(s)-one hundred twenty five/125B Significantly(s)-170A Much(s)-a hundred and seventy/Far(s)-170B Far(s)-210
Table Diameter MM ø125 ø170 ø170 ø210
Diameter of Desk Central Gap MM ø35H7 ø67 ø67 ø67
Internal Diameter of Mandrel Sleeve MM ø40H7 ø40H7 ø40H7
Diameter of Heart By means of Hole MM ø25 ø40 ø40 ø40
Desk Height (Horizontal) MM 215 245 270 270
Desk T-slot Width MM 12H7 12H7 12H7 12H7
Xihu (West Lake) Dis. Block Width MM 14h7 18h7 18h7 18h7
Axis Rotation Tilt(-30°~+120°) Rotation Tilt ±100º Rotation Tilt ±100º Rotation Tilt ±100º
Min. Increment deg. .001 .001 .001 .001 .001 .001 .001 .001
InHangZhou Precision(even though tilt 0°~+90°) sec. 40 60 *¹ twenty 60 *¹ twenty sixty *¹ twenty 60 *¹
Repeatability sec. six 8 6 eight six eight six 8
Clamping Program (Pneumatic) kgf/cm² six 6 six six six six 6 6 / Hyd.35 (optional)
Clamping Torque kgf·m thirteen 31 twenty five 31 31 31 31 31 / Hyd.55
Servo Motor Design FANUC Taper/Straight shaft αis4/βis4 αiF4 / ßiS8 αiS4 / ßiS4 αiF4 / ßiS8 αiF4 / ßiS8 αiF8 / αiS12 / ßiS12 αiF4 / ßiS8 αiF8 / αiS12 / ßiS12
MITSUBISHI Taper/Straight shaft HG/HF-75/one zero five HG/HF-fifty four/104  HG/HF-75/105 HG/HF-fifty four/104 HG/HF-fifty four/104 HG/HF-104 HG/HF-54/104 HG/HF-104
Pace Reduction Ratio 1:sixty one:ninety 1:72 one:one hundred twenty / SIEMENS 1:90 1:ninety 1:90 one:90 one:90
Max. Rotation Fee of Desk (Compute with Fanuc α Motor) r.p.m 44.4 *(33.3) forty four.4 *(33.3) 33.3 *(33.3) 33.3 *(sixteen.6) 33.3 *(33.3) 33.3 *(sixteen.6) 33.3 *(33.3) 33.3 *(16.6)
Allowable Inertia Load Capability (Horizontal) kg.cm.sec² .97 two.two 2.7 four.13
Allowable Workpiece Load 0° Horizontal kg 50 sixty 75 75
0°~90°Tilt kg 35 40 50 fifty
Allowable Load(with Rotary Desk Clamping) F kgf four hundred 600 750 750
FxL kgf·m 31 31 31 Pne.31 / Hyd.55
FxL kgf·m 13 twenty five 31 31
Driving Torque(Rotary axis) kgf·m 9 *(3.7) 18 *(14.6) eighteen *(14.6) 18 *(14.6)
Web Weight (servo motor excluded) kg 97/- one hundred twenty five 153 one hundred sixty

 

Product/Design Device Considerably(s)-100SN/Significantly(s)-160SN(solitary-arm sort)
Table Diameter mm Ø a hundred / Ø one hundred sixty
Diameter of Desk Central Hole mm Ø 35H7x30 deep
Inner Diameter of Mandrel Sleeve mm _
Diameter of Center Through Hole mm Ø25
Table Peak (Horizontal) mm 230
Desk T-slot Width mm 12H7
Xihu (West Lake) Dis. Block Width mm 18h7
Axis Rotation Tilt ±110º
Min. Increment deg. .001 .001
InHangZhou Precision sec. forty sixty
Repeatability sec. four 8
Clamping System (Hydraulic) kg/cm Pneumatic 5 Hydraulic 35
Clamping Torque kg-m 13 70
Servo Motor Design FANUC Straight Shaft αiS4 / ßiS4 αiF8 / ßiS8
MITSUBISHI Straight Shaft HF-KP43JW04-S6 / HG-fifty six HF / HG-154
Pace Reduction Ratio one:60 1:120
Max. Rotation Charge of Table (Determine with Fanuc α Motor) r.p.m forty four.4(33.3) 16.6(eleven.1)
Allowable Inertia Load Capacity (Horizontal) kg.cm.sec .31(Ø100SN) / .8(Ø160SN)
Allowable Workpiece Load 0º Horizontal kg twenty five
0º~90º Tilt kg 20
Allowable Load(with Rotary Desk Clamping) F kgf 600
FxL kgf.m 25
FxL kgf.m 13
Energy of worm gears (Rotary axis) kg.m 9(3.7)
Net Fat (servo motor excluded) kg 116

US $12,800-14,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Video Technical Support, Online Support
Warranty: 1 Year
Logo Printing: with Logo Printing
Size: Middle
Customized: Customized
Type: Base

###

Item/Model UNIT FAR(s)-125/125B FAR(s)-170A FAR(s)-170/FAR(s)-170B FAR(s)-210
Table Diameter MM ø125 ø170 ø170 ø210
Diameter of Table Central Hole MM ø35H7 ø67 ø67 ø67
Inner Diameter of Mandrel Sleeve MM ø40H7 ø40H7 ø40H7
Diameter of Center Through Hole MM ø25 ø40 ø40 ø40
Table Height (Horizontal) MM 215 245 270 270
Table T-slot Width MM 12H7 12H7 12H7 12H7
Guide Block Width MM 14h7 18h7 18h7 18h7
Axis Rotation Tilt(-30°~+120°) Rotation Tilt ±100º Rotation Tilt ±100º Rotation Tilt ±100º
Min. Increment deg. 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001
Indexing Precision(while tilt 0°~+90°) sec. 40 60 *¹ 20 60 *¹ 20 60 *¹ 20 60 *¹
Repeatability sec. 6 8 6 8 6 8 6 8
Clamping System (Pneumatic) kgf/cm² 6 6 6 6 6 6 6 6 / Hyd.35 (optional)
Clamping Torque kgf·m 13 31 25 31 31 31 31 31 / Hyd.55
Servo Motor Model FANUC Taper/Straight shaft αis4/βis4 αiF4 / ßiS8 αiS4 / ßiS4 αiF4 / ßiS8 αiF4 / ßiS8 αiF8 / αiS12 / ßiS12 αiF4 / ßiS8 αiF8 / αiS12 / ßiS12
MITSUBISHI Taper/Straight shaft HG/HF-75/105 HG/HF-54/104  HG/HF-75/105 HG/HF-54/104 HG/HF-54/104 HG/HF-104 HG/HF-54/104 HG/HF-104
Speed Reduction Ratio 1:60 1:90 1:72 1:120 / SIEMENS 1:90 1:90 1:90 1:90 1:90
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) r.p.m 44.4 *(33.3) 44.4 *(33.3) 33.3 *(33.3) 33.3 *(16.6) 33.3 *(33.3) 33.3 *(16.6) 33.3 *(33.3) 33.3 *(16.6)
Allowable Inertia Load Capacity (Horizontal) kg.cm.sec² 0.97 2.2 2.7 4.13
Allowable Workpiece Load 0° Horizontal kg 50 60 75 75
0°~90°Tilt kg 35 40 50 50
Allowable Load(with Rotary Table Clamping) F kgf 400 600 750 750
FxL kgf·m 31 31 31 Pne.31 / Hyd.55
FxL kgf·m 13 25 31 31
Driving Torque(Rotary axis) kgf·m 9 *(3.7) 18 *(14.6) 18 *(14.6) 18 *(14.6)
Net Weight (servo motor excluded) kg 97/- 125 153 160

###

Item/Model Unit FAR(s)-100SN/FAR(s)-160SN(single-arm type)
Table Diameter mm Ø 100 / Ø 160
Diameter of Table Central Hole mm Ø 35H7x30 deep
Inner Diameter of Mandrel Sleeve mm _
Diameter of Center Through Hole mm Ø25
Table Height (Horizontal) mm 230
Table T-slot Width mm 12H7
Guide Block Width mm 18h7
Axis Rotation Tilt ±110º
Min. Increment deg. 0.001 0.001
Indexing Precision sec. 40 60
Repeatability sec. 4 8
Clamping System (Hydraulic) kg/cm Pneumatic 5 Hydraulic 35
Clamping Torque kg-m 13 70
Servo Motor Model FANUC Straight Shaft αiS4 / ßiS4 αiF8 / ßiS8
MITSUBISHI Straight Shaft HF-KP43JW04-S6 / HG-56 HF / HG-154
Speed Reduction Ratio 1:60 1:120
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) r.p.m 44.4(33.3) 16.6(11.1)
Allowable Inertia Load Capacity (Horizontal) kg.cm.sec 0.31(Ø100SN) / 0.8(Ø160SN)
Allowable Workpiece Load 0º Horizontal kg 25
0º~90º Tilt kg 20
Allowable Load(with Rotary Table Clamping) F kgf 600
FxL kgf.m 25
FxL kgf.m 13
Strength of worm gears (Rotary axis) kg.m 9(3.7)
Net Weight (servo motor excluded) kg 116
US $12,800-14,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Video Technical Support, Online Support
Warranty: 1 Year
Logo Printing: with Logo Printing
Size: Middle
Customized: Customized
Type: Base

###

Item/Model UNIT FAR(s)-125/125B FAR(s)-170A FAR(s)-170/FAR(s)-170B FAR(s)-210
Table Diameter MM ø125 ø170 ø170 ø210
Diameter of Table Central Hole MM ø35H7 ø67 ø67 ø67
Inner Diameter of Mandrel Sleeve MM ø40H7 ø40H7 ø40H7
Diameter of Center Through Hole MM ø25 ø40 ø40 ø40
Table Height (Horizontal) MM 215 245 270 270
Table T-slot Width MM 12H7 12H7 12H7 12H7
Guide Block Width MM 14h7 18h7 18h7 18h7
Axis Rotation Tilt(-30°~+120°) Rotation Tilt ±100º Rotation Tilt ±100º Rotation Tilt ±100º
Min. Increment deg. 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001
Indexing Precision(while tilt 0°~+90°) sec. 40 60 *¹ 20 60 *¹ 20 60 *¹ 20 60 *¹
Repeatability sec. 6 8 6 8 6 8 6 8
Clamping System (Pneumatic) kgf/cm² 6 6 6 6 6 6 6 6 / Hyd.35 (optional)
Clamping Torque kgf·m 13 31 25 31 31 31 31 31 / Hyd.55
Servo Motor Model FANUC Taper/Straight shaft αis4/βis4 αiF4 / ßiS8 αiS4 / ßiS4 αiF4 / ßiS8 αiF4 / ßiS8 αiF8 / αiS12 / ßiS12 αiF4 / ßiS8 αiF8 / αiS12 / ßiS12
MITSUBISHI Taper/Straight shaft HG/HF-75/105 HG/HF-54/104  HG/HF-75/105 HG/HF-54/104 HG/HF-54/104 HG/HF-104 HG/HF-54/104 HG/HF-104
Speed Reduction Ratio 1:60 1:90 1:72 1:120 / SIEMENS 1:90 1:90 1:90 1:90 1:90
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) r.p.m 44.4 *(33.3) 44.4 *(33.3) 33.3 *(33.3) 33.3 *(16.6) 33.3 *(33.3) 33.3 *(16.6) 33.3 *(33.3) 33.3 *(16.6)
Allowable Inertia Load Capacity (Horizontal) kg.cm.sec² 0.97 2.2 2.7 4.13
Allowable Workpiece Load 0° Horizontal kg 50 60 75 75
0°~90°Tilt kg 35 40 50 50
Allowable Load(with Rotary Table Clamping) F kgf 400 600 750 750
FxL kgf·m 31 31 31 Pne.31 / Hyd.55
FxL kgf·m 13 25 31 31
Driving Torque(Rotary axis) kgf·m 9 *(3.7) 18 *(14.6) 18 *(14.6) 18 *(14.6)
Net Weight (servo motor excluded) kg 97/- 125 153 160

###

Item/Model Unit FAR(s)-100SN/FAR(s)-160SN(single-arm type)
Table Diameter mm Ø 100 / Ø 160
Diameter of Table Central Hole mm Ø 35H7x30 deep
Inner Diameter of Mandrel Sleeve mm _
Diameter of Center Through Hole mm Ø25
Table Height (Horizontal) mm 230
Table T-slot Width mm 12H7
Guide Block Width mm 18h7
Axis Rotation Tilt ±110º
Min. Increment deg. 0.001 0.001
Indexing Precision sec. 40 60
Repeatability sec. 4 8
Clamping System (Hydraulic) kg/cm Pneumatic 5 Hydraulic 35
Clamping Torque kg-m 13 70
Servo Motor Model FANUC Straight Shaft αiS4 / ßiS4 αiF8 / ßiS8
MITSUBISHI Straight Shaft HF-KP43JW04-S6 / HG-56 HF / HG-154
Speed Reduction Ratio 1:60 1:120
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) r.p.m 44.4(33.3) 16.6(11.1)
Allowable Inertia Load Capacity (Horizontal) kg.cm.sec 0.31(Ø100SN) / 0.8(Ø160SN)
Allowable Workpiece Load 0º Horizontal kg 25
0º~90º Tilt kg 20
Allowable Load(with Rotary Table Clamping) F kgf 600
FxL kgf.m 25
FxL kgf.m 13
Strength of worm gears (Rotary axis) kg.m 9(3.7)
Net Weight (servo motor excluded) kg 116

Benefits and Uses of Miter Gears

If you’ve ever looked into the differences between miter gears, you’re probably wondering how to choose between a Straight toothed and Hypoid one. Before you decide, however, make sure you know about backlash and what it means. Backlash is the difference between the addendum and dedendum, and it prevents jamming of the gears, protects the mating gear surfaces, and allows for thermal expansion during operation.
gear

Spiral bevel gears

Spiral bevel gears are designed to increase efficiency and reduce cost. The spiral shape creates a profile in which the teeth are cut with a slight curve along their length, making them an excellent choice for heavy-duty applications. Spiral bevel gears are also hypoid gears, with no offsets. Their smaller size means that they are more compact than other types of right-angle gears, and they are much quieter than other types of gear.
Spiral bevel gears feature helical teeth arranged in a 90-degree angle. The design features a slight curve to the teeth, which reduces backlash while increasing flexibility. Because they have no offsets, they won’t slip during operation. Spiral bevel gears also have less backlash, making them an excellent choice for high-speed applications. They are also carefully spaced to distribute lubricant over a larger area. They are also very accurate and have a locknut design that prevents them from moving out of alignment.
In addition to the geometric design of bevel gears, CZPT can produce 3D models of spiral bevel gears. This software has gained widespread attention from many companies around the world. In fact, CZPT, a major manufacturer of 5-axis milling machines, recently machined a prototype using a spiral bevel gear model. These results prove that spiral bevel gears can be used in a variety of applications, ranging from precision machining to industrial automation.
Spiral bevel gears are also commonly known as hypoid gears. Hypoid gears differ from spiral bevel gears in that their pitch surface is not at the center of the meshing gear. The benefit of this gear design is that it can handle large loads while maintaining its unique features. They also produce less heat than their bevel counterparts, which can affect the efficiency of nearby components.

Straight toothed miter gears

Miter gears are bevel gears that have a pitch angle of 90 degrees. Their gear ratio is 1:1. Miter gears come in straight and spiral tooth varieties and are available in both commercial and high precision grades. They are a versatile tool for any mechanical application. Below are some benefits and uses of miter gears. A simple explanation of the basic principle of this gear type is given. Read on for more details.
When selecting a miter gear, it is important to choose the right material. Hard faced, high carbon steel is appropriate for applications requiring high load, while nylon and injection molding resins are suitable for lower loads. If a particular gear becomes damaged, it’s advisable to replace the entire set, as they are closely linked in shape. The same goes for spiral-cut miter gears. These geared products should be replaced together for proper operation.
Straight bevel gears are the easiest to manufacture. The earliest method was using an indexing head on a planer. Modern manufacturing methods, such as the Revacycle and Coniflex systems, made the process more efficient. CZPT utilizes these newer manufacturing methods and patented them. However, the traditional straight bevel is still the most common and widely used type. It is the simplest to manufacture and is the cheapest type.
SDP/Si is a popular supplier of high-precision gears. The company produces custom miter gears, as well as standard bevel gears. They also offer black oxide and ground bore and tooth surfaces. These gears can be used for many industrial and mechanical applications. They are available in moderate quantities from stock and in partial sizes upon request. There are also different sizes available for specialized applications.
gear

Hypoid bevel gears

The advantages of using Hypoid bevel and helical gears are obvious. Their high speed, low noise, and long life make them ideal for use in motor vehicles. This type of gear is also becoming increasingly popular in the power transmission and motion control industries. Compared to standard bevel and helical gears, they have a higher capacity for torque and can handle high loads with less noise.
Geometrical dimensioning of bevel/hypoid bevel gears is essential to meet ANSI/AGMA/ISO standards. This article examines a few ways to dimension hypoid bevel and helical gears. First, it discusses the limitations of the common datum surface when dimensioning bevel/helical gear pairs. A straight line can’t be parallel to the flanks of both the gear and the pinion, which is necessary to determine “normal backlash.”
Second, hypoid and helical gears have the same angular pitch, which makes the manufacturing process easier. Hypoid bevel gears are usually made of two gears with equal angular pitches. Then, they are assembled to match one another. This reduces noise and vibration, and increases power density. It is recommended to follow the standard and avoid using gears that have mismatched angular pitches.
Third, hypoid and helical gears differ in the shape of the teeth. They are different from standard gears because the teeth are more elongated. They are similar in appearance to spiral bevel gears and worm gears, but differ in geometry. While helical gears are symmetrical, hypoid bevel gears are non-conical. As a result, they can produce higher gear ratios and torque.

Crown bevel gears

The geometrical design of bevel gears is extremely complex. The relative contact position and flank form deviations affect both the paired gear geometry and the tooth bearing. In addition, paired gears are also subject to process-linked deviations that affect the tooth bearing and backlash. These characteristics require the use of narrow tolerance fields to avoid quality issues and production costs. The relative position of a miter gear depends on the operating parameters, such as the load and speed.
When selecting a crown bevel gear for a miter-gear system, it is important to choose one with the right tooth shape. The teeth of a crown-bevel gear can differ greatly in shape. The radial pitch and diametral pitch cone angles are the most common. The tooth cone angle, or “zerol” angle, is the other important parameter. Crown bevel gears have a wide range of tooth pitches, from flat to spiral.
Crown bevel gears for miter gear are made of high-quality materials. In addition to metal, they can be made of plastic or pre-hardened alloys. The latter are preferred as the material is less expensive and more flexible than steel. Furthermore, crown bevel gears for miter gears are extremely durable, and can withstand extreme conditions. They are often used to replace existing gears that are damaged or worn.
When selecting a crown bevel gear for a miter gear, it is important to know how they relate to each other. This is because the crown bevel gears have a 1:1 speed ratio with a pinion. The same is true for miter gears. When comparing crown bevel gears for miter gears, be sure to understand the radii of the pinion and the ring on the pinion.
gear

Shaft angle requirements for miter gears

Miter gears are used to transmit motion between intersecting shafts at a right angle. Their tooth profile is shaped like the mitre hat worn by a Catholic bishop. Their pitch and number of teeth are also identical. Shaft angle requirements vary depending on the type of application. If the application is for power transmission, miter gears are often used in a differential arrangement. If you’re installing miter gears for power transmission, you should know the mounting angle requirements.
Shaft angle requirements for miter gears vary by design. The most common arrangement is perpendicular, but the axes can be angled to almost any angle. Miter gears are also known for their high precision and high strength. Their helix angles are less than ten degrees. Because the shaft angle requirements for miter gears vary, you should know which type of shaft angle you require before ordering.
To determine the right pitch cone angle, first determine the shaft of the gear you’re designing. This angle is called the pitch cone angle. The angle should be at least 90 degrees for the gear and the pinion. The shaft bearings must also be capable of bearing significant forces. Miter gears must be supported by bearings that can withstand significant forces. Shaft angle requirements for miter gears vary from application to application.
For industrial use, miter gears are usually made of plain carbon steel or alloy steel. Some materials are more durable than others and can withstand higher speeds. For commercial use, noise limitations may be important. The gears may be exposed to harsh environments or heavy machine loads. Some types of gears function with teeth missing. But be sure to know the shaft angle requirements for miter gears before you order one.

China Far-210 5 Axis Indexing Rotary Table Worm and Worm Gear Taiwan Made     spurs gearChina Far-210 5 Axis Indexing Rotary Table Worm and Worm Gear Taiwan Made     spurs gear
editor by czh 2023-01-27