Four basic members
A common planetary stage contains the sun gear, planet gears, internal ring gear and carrier. Which member is fixed, input or output changes the speed relationship.
Why identification is system-level
The sun gear tooth count must work with the planet and ring gears. The visible outside diameter is not enough to define interchangeability.
What buyers should capture
Tooth count, module/DP, pressure angle, any helix/profile shift, bore/spline/shaft details and the mating gear data.
Use the drawing as the controlled record
A technical guide can explain which variables matter, but the final sun gear must be approved from the actual drawing and operating requirement.
If a value is missing, identify it for confirmation instead of copying a dimension or material from a different supplier or gear family.
RFQ checklist
Send the sun gear drawing or measured tooth data, mating planet/ring information, interface dimensions, material/process requirements, duty, quantity and destination.
Deeper buyer guidance
A sun gear belongs to a four-member planetary mechanism, so identification should include the planets, ring and carrier context rather than the center gear alone.
For new designs, use the complete planetary geometry and functional datums before deciding the process route. For replacement work, use photos and equipment references for context but let measured tooth and interface data control the new part.
What to control on the RFQ or drawing
| 목 | What to define |
|---|---|
| Planetary mesh | Sun, planet and ring tooth data plus planet count when known. |
| Center interface | Bore, key, spline or shaft features with functional datums. |
| Operating duty | Rated/peak torque, speed, reversals/shock, life and environment. |
| Material/process | Controlled material, heat treatment, finish and coating requirements. |
| Acceptance | Gear/runout/dimensional checks and required documentation. |
Frequently asked questions
Can a visual match confirm interchangeability?
No. Similar outside dimensions can hide different pitch systems, pressure angles, profile shift or interface fits.
Should mating gear data be included?
Yes whenever available, because planetary geometry is easier to verify as a system.
What if a value is unknown?
Mark it as open and provide the available sample, mating component or application data rather than guessing.
견적 요청 / RFQ 제출
도면, 치형 데이터, 결합 부품 정보, 관세 및 수량을 보내주십시오. 견적을 내기 전에 인터페이스를 검토하겠습니다.
