Mating planet gears
Confirm the mating tooth count, pitch system and pressure angle rather than identifying the sun gear in isolation.
SUN GEAR PRODUCTS
Componentes de engranajes planetarios
Related planet gears, ring gears and component sets for projects that require system-level matching around the sun gear.
Componentes de engranajes planetariosPlanetary DriveCustom RFQ
Technical specification / ordering data
| Parameter | What to Specify |
|---|---|
| Component scope | Sun gear, planet gear, internal ring gear and related matched components as required. |
| Tooth relationship | Provide all tooth counts, pitch system and pressure angle. |
| Number of planets | Needed to check spacing and assembly conditions. |
| Carrier / interface | Pin diameter, face width, thrust/axial arrangement and bearing relationships where relevant. |
| Material / heat treatment | Per drawing and duty for each component. |
| Inspección | Define component and system-level checks required by the project. |
Selection points
These are the questions to close before production.
Concentricity & runout
Define the datum relationship among gear teeth, bore/spline/shaft and bearing seats.
Duty
Rated and peak torque, speed, reversals, shock and life influence material/process decisions.
Inspección
Agree the report content before production when tooth or interface verification is critical.
Replacement and custom projects
Related planet gears, ring gears and component sets for projects that require system-level matching around the sun gear.
For matched planetary components, provide the complete sun/planet/ring tooth relationship and carrier information so the set can be reviewed as one stage. Individual part photos are useful only as supporting context.
When a component set should be reviewed together
If several members are damaged or the original geometry is uncertain, reviewing the sun, planets and ring together can reduce the risk of reproducing only one part of a worn or modified stage.
For related planetary components, review which existing members will remain in service and which will be replaced. A matched review is most useful when sun, planet and ring geometry or wear condition is uncertain across more than one component.
Each member can have a different interface and process requirement, so material or heat-treatment notes should stay component-specific. Duty and inspection information should be tied to the part being supplied rather than copied across the set.
Before approving production
Mesh confirmation
Verify tooth system and mating planetary geometry.
Interface confirmation
Verify bore/spline/shaft fits, datums and retention.
Process confirmation
Verify material, heat treatment, finishing and coating requirements.
Acceptance confirmation
Verify tooth, runout, dimensional and documentation requirements.
Solicitud de cotización
Solicitar presupuesto / Enviar solicitud de cotización
Envíenos el dibujo, los datos de los dientes, la información de los componentes de acoplamiento, el arancel y la cantidad. Revisaremos la interfaz antes de enviarle el presupuesto.
Cantidad mínima de pedidoFlexible según el tipo de producto y el valor total del pedido.
MuestrasLos nuevos clientes pueden solicitar entre 1 y 5 unidades cuando la pieza y el proceso sean adecuados.
Pedidos mixtosSe pueden combinar diferentes modelos de engranajes solares o componentes planetarios relacionados cuando el valor total del pedido sea de aproximadamente 1.500 USD o superior.
Pedidos pequeñosSe pueden considerar pedidos de 1 a 2 unidades, aunque normalmente con un coste unitario más elevado.
EntregaPiezas estándar: 10-25 días laborables. Componentes personalizados: 20-45 días laborables. Equipos para proyectos: 45-120 días laborables.
Términos comercialesLos términos EXW, FOB, CIF y DAP son comúnmente aceptados. Los términos FCA, CFR, CPT, CIP y DDP pueden analizarse caso por caso.
