Eje de engranaje solar frente a engranaje solar independiente
Integrating the sun gear with a shaft can reduce joints, but it also makes journals, bearings, splines and gear teeth one precision component.
Integrated geometry
Bearing seats, shoulders, threads and splines must be dimensioned from clear datums relative to the gear teeth.
Heat-treatment interaction
Material and heat-treatment planning must account for both tooth performance and shaft features.
Replacement work
Measure the complete shaft, not only the gear section, and include bearing/retention relationships.
Use the drawing as the controlled record
A technical guide can explain which variables matter, but the final sun gear must be approved from the actual drawing and operating requirement.
If a value is missing, identify it for confirmation instead of copying a dimension or material from a different supplier or gear family.
RFQ checklist
Send the sun gear drawing or measured tooth data, mating planet/ring information, interface dimensions, material/process requirements, duty, quantity and destination.
Deeper buyer guidance
Integrated shafts reduce separate joints but expand the machining, heat-treatment and datum-control scope of the part.
For new designs, use the complete planetary geometry and functional datums before deciding the process route. For replacement work, use photos and equipment references for context but let measured tooth and interface data control the new part.
What to control on the RFQ or drawing
| Item | What to define |
|---|---|
| Planetary mesh | Sun, planet and ring tooth data plus planet count when known. |
| Center interface | Bore, key, spline or shaft features with functional datums. |
| Operating duty | Rated/peak torque, speed, reversals/shock, life and environment. |
| Material/process | Controlled material, heat treatment, finish and coating requirements. |
| Acceptance | Gear/runout/dimensional checks and required documentation. |
Frequently asked questions
Can a visual match confirm interchangeability?
No. Similar outside dimensions can hide different pitch systems, pressure angles, profile shift or interface fits.
Should mating gear data be included?
Yes whenever available, because planetary geometry is easier to verify as a system.
What if a value is unknown?
Mark it as open and provide the available sample, mating component or application data rather than guessing.
Solicitar presupuesto / Enviar solicitud de cotización
Envíenos el dibujo, los datos de los dientes, la información de los componentes de acoplamiento, el arancel y la cantidad. Revisaremos la interfaz antes de enviarle el presupuesto.
