Mating planet gears
Confirm the mating tooth count, pitch system and pressure angle rather than identifying the sun gear in isolation.
Technical specification / ordering data
| Parameter | What to Specify |
|---|---|
| Tooth geometry | Module/DP, pressure angle, tooth count and any profile shift. |
| Bore | Diameter, fit, keyway/spline if present and axial length. |
| Wall / hub geometry | Section thickness, shoulders and retention features. |
| Mating components | Planet gear and ring gear data. |
| Material / heat treatment | Per application and drawing. |
| 検査 | Bore-to-tooth concentricity and required tooth measurements. |
Selection points
These are the questions to close before production.
Concentricity & runout
Define the datum relationship among gear teeth, bore/spline/shaft and bearing seats.
Duty
Rated and peak torque, speed, reversals, shock and life influence material/process decisions.
検査
Agree the report content before production when tooth or interface verification is critical.
Replacement and custom projects
Sun gears with through-bores or hollow interfaces for compact coaxial planetary arrangements.
For replacement hollow sun gears, verify bore fit, bore-to-tooth concentricity and the mating planet/ring geometry together. Photos can show the arrangement, but the controlled measurements determine interchangeability.
Bore size changes the section and the process plan
A large through bore or internal spline reduces the remaining section between the center feature and tooth root, so duty, wall thickness and distortion should be reviewed together.
For hollow sun gears, freeze the external tooth system and the bore or internal spline as one section before selecting the process route. The remaining wall thickness and gear-to-bore concentricity are central to the part definition.
If material and heat treatment are already specified, preserve them. If the bore size or internal feature is being changed, include torque and duty information so the effect on section strength and distortion can be reviewed.
Before approving production
Mesh confirmation
Verify tooth system and mating planetary geometry.
Interface confirmation
Verify bore/spline/shaft fits, datums and retention.
Process confirmation
Verify material, heat treatment, finishing and coating requirements.
Acceptance confirmation
Verify tooth, runout, dimensional and documentation requirements.
最小注文数量製品の種類と注文総額に応じて柔軟に対応します。
サンプル新規のお客様は、部品と製造工程が適切であれば、1～5個の注文をすることができます。
混合注文合計注文金額が1,500米ドル以上の場合、異なる太陽歯車装置や関連する遊星歯車機構のモデルを組み合わせて使用することができます。
小口注文1～2個からのご注文もご相談に応じますが、通常は単価が高くなります。
配達標準部品：10～25営業日。特注部品：20～45営業日。プロジェクト機器：45～120営業日。
取引条件EXW、FOB、CIF、DAPは一般的に対応可能です。FCA、CFR、CPT、CIP、DDPについては、個別にご相談ください。
