Sun Gear Bore, Keyway or Spline: Interface Choices
The center interface determines how torque enters the sun gear and how accurately the part stays on the planetary centerline.
Why this topic changes the sun gear decision
The key engineering question is bore, keyway and spline options. The center interface carries torque and also establishes how the sun gear is located relative to bearings, the carrier and the mating planets.
A dimensionally correct interface can still produce poor tooth contact if it is eccentric to the external gear teeth. Fits and datums therefore belong in the same review as the gear geometry.
Practical design and replacement implications
For replacement work, measure the mating shaft or hub when possible. Service wear can change spline tooth thickness, keyway condition or bore size and should not be copied into the new drawing.
For new designs, define engagement length, lead-in features, retention and service access along with the torque requirement.
What to control on the RFQ or drawing
| Item | What to define |
|---|---|
| Tooth system | Tooth count, module/DP, pressure angle, helix and profile shift/modification when applicable. |
| Planetary context | Mating planet/ring data and planet count when available. |
| Center interface | Bore, keyway, spline, hollow center or integrated shaft plus functional datums. |
| Duty | Rated/peak torque, speed, reversals/shock, life, lubrication and environment. |
| Process | Controlled material, heat treatment, finishing and coating requirements. |
| Acceptance | Tooth/runout/dimensional inspection and required documentation. |
よくある質問
Can one loose sun gear answer every design question?
Usually not. Mating gear data and the center interface provide important cross-checks.
Should material or tolerance be copied from a similar part?
Only when the controlled design allows it. Similar appearance is not proof of the same duty or specification.
What is the fastest way to get a useful quote?
Send the latest drawing or measured tooth/interface data, mating component information, duty, acceptance needs and quantity.
見積もり依頼／見積依頼を送信
Send the drawing, mating gear information, center interface, duty, inspection needs and quantity. The article is selection guidance; the approved drawing controls production.
