Mating planet gears
Confirm the mating tooth count, pitch system and pressure angle rather than identifying the sun gear in isolation.
SUN GEAR PRODUCTS
Splined Sun Gears
Sun gears with spline interfaces for planetary drives requiring positive torque transfer and controlled concentricity.
Splined Sun GearsPlanetary DriveCustom RFQ
Technical specification / ordering data
| Parameter | What to Specify |
|---|---|
| Gear teeth | Sun-gear module/DP, pressure angle, tooth count and helix/profile data. |
| Spline | Internal or external spline per controlled drawing/standard. |
| Spline fit | Fit class, effective length and inspection/gauge requirement. |
| Datums | Runout and concentricity relationship between gear teeth, spline and faces. |
| Material / heat treatment | Per drawing and duty. |
| Inspectie | Gear and spline inspection scope agreed before production. |
Selection points
These are the questions to close before production.
Concentricity & runout
Define the datum relationship among gear teeth, bore/spline/shaft and bearing seats.
Duty
Rated and peak torque, speed, reversals, shock and life influence material/process decisions.
Inspectie
Agree the report content before production when tooth or interface verification is critical.
Replacement and custom projects
Sun gears with spline interfaces for planetary drives requiring positive torque transfer and controlled concentricity.
For a replacement splined sun gear, verify both the planetary mesh and the spline standard, fit and datum relationship. Photos help identify the assembly, but spline and tooth measurements control the part.
Offerteaanvraag
Offerte aanvragen / Offerteaanvraag versturen
Send the drawing, tooth data, mating-component information, duty and quantity. We will review the interface before quotation.
MOQFlexibel qua producttype en totale orderwaarde.
VoorbeeldenNieuwe klanten kunnen 1 tot 5 stuks bestellen als het onderdeel en het productieproces dit toelaten.
Gemengde bestellingenDifferent sun gear or related planetary-component models can be combined when the total order value is around USD 1,500 or above.
Kleine bestellingenBestellingen van 1-2 stuks kunnen worden besproken, doorgaans met een hogere prijs per stuk.
LeveringStandaardonderdelen: 10-25 werkdagen. Maatwerkonderdelen: 20-45 werkdagen. Projectapparatuur: 45-120 werkdagen.
HandelsvoorwaardenEXW, FOB, CIF en DAP worden over het algemeen ondersteund. FCA, CFR, CPT, CIP en DDP kunnen per geval worden besproken.
