Mating planet gears
Confirm the mating tooth count, pitch system and pressure angle rather than identifying the sun gear in isolation.
SUN GEAR PRODUCTS
Engrenages solaires cannelés
Sun gears with spline interfaces for planetary drives requiring positive torque transfer and controlled concentricity.
Engrenages solaires cannelésPlanetary DriveCustom RFQ
Technical specification / ordering data
| Paramètre | Que spécifier |
|---|---|
| Gear teeth | Sun-gear module/DP, pressure angle, tooth count and helix/profile data. |
| Spline | Internal or external spline per controlled drawing/standard. |
| Spline fit | Fit class, effective length and inspection/gauge requirement. |
| Datums | Runout and concentricity relationship between gear teeth, spline and faces. |
| Material / heat treatment | Per drawing and duty. |
| Inspection | Gear and spline inspection scope agreed before production. |
Selection points
These are the questions to close before production.
Concentricity & runout
Define the datum relationship among gear teeth, bore/spline/shaft and bearing seats.
Devoir
Rated and peak torque, speed, reversals, shock and life influence material/process decisions.
Inspection
Agree the report content before production when tooth or interface verification is critical.
Replacement and custom projects
Sun gears with spline interfaces for planetary drives requiring positive torque transfer and controlled concentricity.
For a replacement splined sun gear, verify both the planetary mesh and the spline standard, fit and datum relationship. Photos help identify the assembly, but spline and tooth measurements control the part.
Two tooth systems must be controlled together
The external gear teeth and center spline are separate precision interfaces. Spline fit, effective length and concentricity to the gear teeth all influence assembly and load distribution.
For splined sun gears, the external gear and spline must be reviewed as two linked tooth systems. The spline fit and effective length should be confirmed together with the external gear datum before process planning.
Preserve the specified gear and spline standards when available. If the original spline is worn, use the mating shaft or hub to separate service wear from the intended fit before the part is released.
Before approving production
Mesh confirmation
Verify tooth system and mating planetary geometry.
Interface confirmation
Verify bore/spline/shaft fits, datums and retention.
Process confirmation
Verify material, heat treatment, finishing and coating requirements.
Acceptance confirmation
Verify tooth, runout, dimensional and documentation requirements.
Demande de devis
Demande de devis / Envoyer une demande de prix
Veuillez nous envoyer le dessin, les données de denture, les informations sur les composants d'accouplement, le droit de passage et la quantité. Nous examinerons l'interface avant de vous établir un devis.
MOQFlexible selon le type de produit et la valeur totale de la commande.
ÉchantillonsLes nouveaux clients peuvent commander de 1 à 5 pièces lorsque la pièce et le processus le permettent.
Commandes mixtesDifférents modèles d'équipements solaires ou de composants planétaires apparentés peuvent être combinés lorsque la valeur totale de la commande est d'environ 1 500 USD ou plus.
petites commandesLes commandes de 1 à 2 pièces peuvent être discutées, généralement avec un coût unitaire plus élevé.
LivraisonPièces standard : 10 à 25 jours ouvrables. Composants sur mesure : 20 à 45 jours ouvrables. Équipements de projet : 45 à 120 jours ouvrables.
Conditions commercialesLes incoterms EXW, FOB, CIF et DAP sont généralement acceptés. Les incoterms FCA, CFR, CPT, CIP et DDP peuvent être discutés au cas par cas.
