Mating planet gears
Confirm the mating tooth count, pitch system and pressure angle rather than identifying the sun gear in isolation.
SUN GEAR PRODUCTS
Engrenages solaires personnalisés
Drawing-based sun gears for new designs and replacements requiring custom tooth geometry, interfaces, material, heat treatment or inspection.
Engrenages solaires personnalisésPlanetary DriveCustom RFQ
Technical specification / ordering data
| Paramètre | Que spécifier |
|---|---|
| Drawing identity | Revision-controlled drawing or approved 3D/2D definition. |
| Gear geometry | Tooth count, module/DP, pressure angle, helix/profile shift and modifications. |
| Interface | Bore, spline, shaft, keyway, thread, shoulders and datums. |
| Material / heat treatment | Grade, hardness, case/core requirement and any substitution restriction. |
| Quality | Tooth, dimensional and material/heat-treatment records required for approval. |
| Quantity | Prototype/sample, batch quantity and expected repeat demand. |
Selection points
These are the questions to close before production.
Concentricity & runout
Define the datum relationship among gear teeth, bore/spline/shaft and bearing seats.
Devoir
Rated and peak torque, speed, reversals, shock and life influence material/process decisions.
Inspection
Agree the report content before production when tooth or interface verification is critical.
Replacement and custom projects
Drawing-based sun gears for new designs and replacements requiring custom tooth geometry, interfaces, material, heat treatment or inspection.
For custom or legacy sun gears, submit the controlled drawing or a complete measured definition of tooth geometry and mechanical interface. Photos and markings can support identification but do not replace the drawing.
Custom does not mean undefined
A quote-ready custom gear still needs a controlled tooth system, interface, material/process scope, duty and inspection plan. Unknowns should be marked for review rather than silently assumed.
For custom sun gears, separate confirmed drawing values from open design items before manufacturing review. That makes it possible to plan tooling and inspection around the actual geometry instead of a collection of assumptions.
Use application data only where the drawing leaves a genuine decision open. The approved revision should carry the final material, heat-treatment, finish and acceptance requirements into prototype and repeat orders.
Before approving production
Mesh confirmation
Verify tooth system and mating planetary geometry.
Interface confirmation
Verify bore/spline/shaft fits, datums and retention.
Process confirmation
Verify material, heat treatment, finishing and coating requirements.
Acceptance confirmation
Verify tooth, runout, dimensional and documentation requirements.
Demande de devis
Demande de devis / Envoyer une demande de prix
Veuillez nous envoyer le dessin, les données de denture, les informations sur les composants d'accouplement, le droit de passage et la quantité. Nous examinerons l'interface avant de vous établir un devis.
MOQFlexible selon le type de produit et la valeur totale de la commande.
ÉchantillonsLes nouveaux clients peuvent commander de 1 à 5 pièces lorsque la pièce et le processus le permettent.
Commandes mixtesDifférents modèles d'équipements solaires ou de composants planétaires apparentés peuvent être combinés lorsque la valeur totale de la commande est d'environ 1 500 USD ou plus.
petites commandesLes commandes de 1 à 2 pièces peuvent être discutées, généralement avec un coût unitaire plus élevé.
LivraisonPièces standard : 10 à 25 jours ouvrables. Composants sur mesure : 20 à 45 jours ouvrables. Équipements de projet : 45 à 120 jours ouvrables.
Conditions commercialesLes incoterms EXW, FOB, CIF et DAP sont généralement acceptés. Les incoterms FCA, CFR, CPT, CIP et DDP peuvent être discutés au cas par cas.
