Mating planet gears
Confirm the mating tooth count, pitch system and pressure angle rather than identifying the sun gear in isolation.
SUN GEAR PRODUCTS
Composants d'engrenages planétaires
Related planet gears, ring gears and component sets for projects that require system-level matching around the sun gear.
Composants d'engrenages planétairesPlanetary DriveCustom RFQ
Technical specification / ordering data
| Paramètre | Que spécifier |
|---|---|
| Component scope | Sun gear, planet gear, internal ring gear and related matched components as required. |
| Tooth relationship | Provide all tooth counts, pitch system and pressure angle. |
| Number of planets | Needed to check spacing and assembly conditions. |
| Carrier / interface | Pin diameter, face width, thrust/axial arrangement and bearing relationships where relevant. |
| Material / heat treatment | Per drawing and duty for each component. |
| Inspection | Define component and system-level checks required by the project. |
Selection points
These are the questions to close before production.
Concentricity & runout
Define the datum relationship among gear teeth, bore/spline/shaft and bearing seats.
Devoir
Rated and peak torque, speed, reversals, shock and life influence material/process decisions.
Inspection
Agree the report content before production when tooth or interface verification is critical.
Replacement and custom projects
Related planet gears, ring gears and component sets for projects that require system-level matching around the sun gear.
For matched planetary components, provide the complete sun/planet/ring tooth relationship and carrier information so the set can be reviewed as one stage. Individual part photos are useful only as supporting context.
When a component set should be reviewed together
If several members are damaged or the original geometry is uncertain, reviewing the sun, planets and ring together can reduce the risk of reproducing only one part of a worn or modified stage.
For related planetary components, review which existing members will remain in service and which will be replaced. A matched review is most useful when sun, planet and ring geometry or wear condition is uncertain across more than one component.
Each member can have a different interface and process requirement, so material or heat-treatment notes should stay component-specific. Duty and inspection information should be tied to the part being supplied rather than copied across the set.
Before approving production
Mesh confirmation
Verify tooth system and mating planetary geometry.
Interface confirmation
Verify bore/spline/shaft fits, datums and retention.
Process confirmation
Verify material, heat treatment, finishing and coating requirements.
Acceptance confirmation
Verify tooth, runout, dimensional and documentation requirements.
Demande de devis
Demande de devis / Envoyer une demande de prix
Send the drawing, tooth data, mating-component information, duty and quantity. We will review the interface before quotation.
MOQFlexible selon le type de produit et la valeur totale de la commande.
ÉchantillonsLes nouveaux clients peuvent commander de 1 à 5 pièces lorsque la pièce et le processus le permettent.
Commandes mixtesDifférents modèles d'équipements solaires ou de composants planétaires apparentés peuvent être combinés lorsque la valeur totale de la commande est d'environ 1 500 USD ou plus.
petites commandesLes commandes de 1 à 2 pièces peuvent être discutées, généralement avec un coût unitaire plus élevé.
LivraisonPièces standard : 10 à 25 jours ouvrables. Composants sur mesure : 20 à 45 jours ouvrables. Équipements de projet : 45 à 120 jours ouvrables.
Conditions commercialesLes incoterms EXW, FOB, CIF et DAP sont généralement acceptés. Les incoterms FCA, CFR, CPT, CIP et DDP peuvent être discutés au cas par cas.
