Mating planet gears
Confirm the mating tooth count, pitch system and pressure angle rather than identifying the sun gear in isolation.
SUN GEAR PRODUCTS
Standard Sun Gears
External sun gears for planetary transmissions, quoted from the tooth system, mating gear geometry and bore/interface drawing.
Standard Sun GearsPlanetary DriveCustom RFQ
Technical specification / ordering data
| Parameter | What to Specify |
|---|---|
| Product form | External sun gear; spur or helical as defined by the planetary design. |
| Pitch system | Module or DP per drawing. |
| Pressure angle | Per mating planet gear / drawing. |
| Tooth count | Defined by the planetary ratio and center-distance geometry. |
| Bore / interface | Plain bore, keyway, spline or other controlled interface. |
| Material / heat treatment | Per drawing and duty requirement. |
| Tooth finish | Hobbed/shaped/ground as required by the drawing. |
| Inspection | Tooth thickness/span/over-pin, runout/profile/lead or other agreed characteristics. |
Selection points
These are the questions to close before production.
Concentricity & runout
Define the datum relationship among gear teeth, bore/spline/shaft and bearing seats.
Duty
Rated and peak torque, speed, reversals, shock and life influence material/process decisions.
Inspection
Agree the report content before production when tooth or interface verification is critical.
Replacement and custom projects
External sun gears for planetary transmissions, quoted from the tooth system, mating gear geometry and bore/interface drawing.
For replacement standard sun gears, confirm the tooth system and mating planet/ring geometry before using outside diameter as a selection reference. Photos help identify the layout, but measured tooth data control the part.
Запрос предложений
Запросить ценовое предложение / Отправить запрос на коммерческое предложение
Send the drawing, tooth data, mating-component information, duty and quantity. We will review the interface before quotation.
Минимальный объем заказаГибкие условия в зависимости от типа товара и общей стоимости заказа.
ОбразцыНовые клиенты могут заказать от 1 до 5 штук, если деталь и технологический процесс соответствуют требованиям.
Смешанные заказыDifferent sun gear or related planetary-component models can be combined when the total order value is around USD 1,500 or above.
Небольшие заказыЗаказы от 1 до 2 штук могут быть обсуждены, как правило, с более высокой себестоимостью за единицу.
ДоставкаСтандартные детали: 10-25 рабочих дней. Компоненты, изготовленные на заказ: 20-45 рабочих дней. Проектное оборудование: 45-120 рабочих дней.
Условия торговлиОбычно поддерживаются условия EXW, FOB, CIF и DAP. Условия FCA, CFR, CPT, CIP и DDP могут обсуждаться в каждом конкретном случае.
