Tooth geometry
Module, DP, pressure angle, helix and mating rules.
KNOWLEDGE
Gear Rack & Pinion Knowledge Center
Practical guidance for rack selection, replacement, installation and RFQ preparation. Articles connect technical questions back to the product and application decisions that buyers need to make.
SelectionInstalasiMaintenance
Core guides
[sun_gears_post_grid]
Use the guides with the drawing
Knowledge articles can help frame a design review, but they do not replace the controlled drawing or project calculation. When a guide discusses a variable such as backlash or feed force, use the actual machine condition to determine the acceptance requirement.
Technical topics
Precision
Ground vs. cut racks, quality requirements and system contributors.
Instalasi
Segment joining, alignment, datum surfaces and mesh setting.
Aplikasi
CNC, robot tracks, laser cutting and heavy travel.
Maintenance
Lubrication, inspection and wear indicators.
RFQ preparation
The dimensions and duty information that make quotations comparable.
Commercial return path
Each article links back to the relevant rack family or application and ends with an RFQ prompt. This keeps technical content useful to real projects rather than becoming an isolated glossary.
Need a project-specific answer?
Send the drawing and machine duty. We will use the same selection variables described in the Knowledge Center to identify what still needs confirmation.
Permintaan Penawaran (RFQ)
Use the guide, then send the actual drawing.
Sertakan tipe rak, sistem pitch, sudut tekanan, panjang yang dibutuhkan, data pinion pasangannya, akurasi atau toleransi target, tugas pengoperasian, dan kuantitas. Gambar adalah cara tercepat untuk menghilangkan ambiguitas.
MOQFleksibel berdasarkan jenis produk dan nilai total pesanan.
SampelPelanggan baru dapat memesan 1-5 buah jika suku cadang dan prosesnya sesuai.
Pesanan campurBerbagai model rack, pinion, atau model terkait lainnya dapat dikombinasikan jika total nilai pesanan sekitar USD 1.500 atau lebih.
Pesanan kecilPemesanan mulai dari 1-2 buah dapat dibicarakan, biasanya dengan biaya satuan yang lebih tinggi.
PengirimanKomponen standar: 10-25 hari kerja. Komponen khusus: 20-45 hari kerja. Peralatan proyek: 45-120 hari kerja.
Syarat perdaganganEXW, FOB, CIF, dan DAP umumnya didukung. FCA, CFR, CPT, CIP, dan DDP dapat dibahas berdasarkan kasus per kasus.
