Tooth geometry
Module, DP, pressure angle, helix and mating rules.
KNOWLEDGE
Gear Rack & Pinion Knowledge Center
Practical guidance for rack selection, replacement, installation and RFQ preparation. Articles connect technical questions back to the product and application decisions that buyers need to make.
SelectionInstallationMaintenance
Core guides
[sun_gears_post_grid]
Use the guides with the drawing
Knowledge articles can help frame a design review, but they do not replace the controlled drawing or project calculation. When a guide discusses a variable such as backlash or feed force, use the actual machine condition to determine the acceptance requirement.
Technical topics
Precision
Ground vs. cut racks, quality requirements and system contributors.
Installation
Segment joining, alignment, datum surfaces and mesh setting.
Ứng dụng
CNC, robot tracks, laser cutting and heavy travel.
Maintenance
Lubrication, inspection and wear indicators.
RFQ preparation
The dimensions and duty information that make quotations comparable.
Commercial return path
Each article links back to the relevant rack family or application and ends with an RFQ prompt. This keeps technical content useful to real projects rather than becoming an isolated glossary.
Need a project-specific answer?
Send the drawing and machine duty. We will use the same selection variables described in the Knowledge Center to identify what still needs confirmation.
Yêu cầu báo giá (RFQ)
Use the guide, then send the actual drawing.
Include the rack type, pitch system, pressure angle, required length, mating pinion data, target accuracy or tolerance, operating duty and quantity. A drawing is the fastest way to remove ambiguity.
Số lượng đặt hàng tối thiểuGiá cả linh hoạt tùy thuộc vào loại sản phẩm và tổng giá trị đơn hàng.
MẫuNew customers may request 1-5 pieces when the part and process are suitable.
Đơn hàng hỗn hợpCó thể kết hợp các mẫu thanh răng, bánh răng hoặc các mẫu liên quan khác nhau khi tổng giá trị đơn hàng đạt khoảng 1.500 USD trở lên.
Đơn hàng nhỏOrders from 1-2 pieces can be discussed, normally with a higher unit cost.
Vận chuyểnStandard parts: 10-25 working days. Custom components: 20-45 working days. Project equipment: 45-120 working days.
Điều khoản thương mạiCác điều khoản EXW, FOB, CIF và DAP thường được hỗ trợ. Các điều khoản FCA, CFR, CPT, CIP và DDP có thể được thảo luận tùy từng trường hợp.
