Mating planet gears
Confirm the mating tooth count, pitch system and pressure angle rather than identifying the sun gear in isolation.
SUN GEAR PRODUCTS
Gear Matahari Berpintal
Sun gears with spline interfaces for planetary drives requiring positive torque transfer and controlled concentricity.
Gear Matahari BerpintalPlanetary DriveCustom RFQ
Technical specification / ordering data
| Parameter | What to Specify |
|---|---|
| Gear teeth | Sun-gear module/DP, pressure angle, tooth count and helix/profile data. |
| Spline | Internal or external spline per controlled drawing/standard. |
| Spline fit | Fit class, effective length and inspection/gauge requirement. |
| Datums | Runout and concentricity relationship between gear teeth, spline and faces. |
| Material / heat treatment | Per drawing and duty. |
| Inspection | Gear and spline inspection scope agreed before production. |
Selection points
These are the questions to close before production.
Concentricity & runout
Define the datum relationship among gear teeth, bore/spline/shaft and bearing seats.
Duty
Rated and peak torque, speed, reversals, shock and life influence material/process decisions.
Inspection
Agree the report content before production when tooth or interface verification is critical.
Replacement and custom projects
Sun gears with spline interfaces for planetary drives requiring positive torque transfer and controlled concentricity.
For a replacement splined sun gear, verify both the planetary mesh and the spline standard, fit and datum relationship. Photos help identify the assembly, but spline and tooth measurements control the part.
RFQ
Minta Sebut Harga / Hantar RFQ
Send the drawing, tooth data, mating-component information, duty and quantity. We will review the interface before quotation.
MOQFleksibel mengikut jenis produk dan jumlah nilai pesanan.
SampelPelanggan baharu boleh meminta 1-5 keping apabila bahagian dan prosesnya sesuai.
Pesanan campuranGear matahari yang berbeza atau model komponen planet yang berkaitan boleh digabungkan apabila jumlah nilai pesanan sekitar USD 1,500 atau lebih.
Pesanan kecilPesanan 1-2 keping boleh dibincangkan, biasanya dengan kos seunit yang lebih tinggi.
PenghantaranBahagian standard: 10-25 hari bekerja. Komponen tersuai: 20-45 hari bekerja. Peralatan projek: 45-120 hari bekerja.
Terma perdaganganEXW, FOB, CIF dan DAP biasanya disokong. FCA, CFR, CPT, CIP dan DDP boleh dibincangkan mengikut kes.
