INDUSTRIAL PLANETARY DRIVES
Sun Gears for Planetary Gearboxes
Planetary gearboxes place the sun gear at the center of the mesh. A reliable RFQ must treat the sun gear, planet gears, ring gear and carrier geometry as one system.
TugasInterfaceInspeksi
Application-specific RFQ checklist
| Parameter | What to Specify |
|---|---|
| Duty data | Rated and peak torque, input/output speed, starts, reversals and target life. |
| Geometry | Sun/planet/ring tooth counts, module or DP, pressure angle and any profile shift. |
| Interface | Spline, shaft, bore, bearing-seat and retention details. |
| Risk point | Load sharing and tooth-contact errors can concentrate load on one planet path. |
Confirm the whole planetary interface
Start by identifying which planetary member is input, output or fixed, then verify the sun-to-planet mesh and the ring-gear relationship before manufacturing.
When the original gearbox drawing is missing, supply tooth counts for the sun, planets and ring, plus carrier/center-distance information so the stage can be checked as a complete gear train.
Permintaan Penawaran (RFQ)
Minta Penawaran / Kirim Permintaan Penawaran
Send the gearbox drawing, sun/planet/ring tooth counts, input and output duty, interface dimensions and quantity. Include the gearbox nameplate when the request is for a replacement.
MOQFleksibel berdasarkan jenis produk dan nilai total pesanan.
SampelPelanggan baru dapat memesan 1-5 buah jika suku cadang dan prosesnya sesuai.
Pesanan campurDifferent sun gear or related planetary-component models can be combined when the total order value is around USD 1,500 or above.
Pesanan kecilPemesanan mulai dari 1-2 buah dapat dibicarakan, biasanya dengan biaya satuan yang lebih tinggi.
PengirimanKomponen standar: 10-25 hari kerja. Komponen khusus: 20-45 hari kerja. Peralatan proyek: 45-120 hari kerja.
Syarat perdaganganEXW, FOB, CIF, dan DAP umumnya didukung. FCA, CFR, CPT, CIP, dan DDP dapat dibahas berdasarkan kasus per kasus.
